255 Style
Solid Wood Slab With Accent Stripes
Select Maple with Walnut Accent Stripe Pattern and profile "A"
|
You must select an outside edge profile for this door series. Round finger pulls are available for this door style. Custom mullion grid ready for glass doors are available for this door style. |
|
|
|
| More door options are available you can look over. CLICK HERE for more details. |
The natural range of colors allowed in all wood species including limited amounts of sap and mineral streaks. Select woods are available in many woods for a higher grade of color and grain match. See Wood Species for more wood details.
Solid wood slab panels. This is not recommended in many kitchen door setups due to possible cupping in the wood. When doing slab doors for kitchen cabinets veneer slab doors are usually recommended.
Standard thickness is 3/4″ thick. Two Battens on the back side of the door are 5/8″ thick by 1-5/8″ wide located 2″ from the side edge and 3″ from the top and bottom. Battens are installed to help prevent/slow solid wood slab doors from naturally cupping over time.
Standard outside edge profiles ‘A’ through ‘M’ are available. See outside edge profiles for more options.
Door has accent stripes where you select the wood species as follows: 2″ wide main wood choice, 3/8″ wide accent wood choice, 3/8″ wide main wood choice, 3/4″ side accent wood choice with the balance the main wood choice. Additional options are available under door extras.
Minimum Size 5-1/2″ x 4″
Maximum Size 26″ x 96″
Drawer Front Match #500 matching drawer front has horizontal grain with accent stripes from the top down as follows: 1-1/2″ main wood, 3/8″ accent wood, 3/8″ main wood, 3/4″ accent wood with the remaining width the main wood.
Glass or Open Frame Door Available No
